Plastic Injection Moulding

Posts Tagged ‘machine’

ARBURG 110-TON ALLROUNDER CENTEX PLASTIC INJECTION MOLDING MACHINE, MODEL 420 C 1000-350, 6.8 OZ (193 GRAMS), MAN. IN 02/2001, SELOGICA CONTROLS, 16.54″ x 16.54″ (420 MM x 420 MM) TBS, 21.46″ x 21.46″ (545 MM x 545 MM) PLATENS, 29.53″ (750 MM) MAX. DAYLIGHT, 25 HP MOTOR WIRED AT 230V, DIMS: 150″L x 42″W x 70″H, WEIGHT: 8488 LBS., 43364 PUMP ON HOURS & 37685 OPERATING HOUR ON 07/19/2011, WEBSITE PHOTOGRAPHS www.acmeplasticfl.com MACHINE SPECIFICATIONS www.acmeplasticfl.com

Hobby / home vertical manual plastic injection molding machine for sale. It can be placed on a benchtop or a tabletop and features 20000 max injection pressure, 1oz max shot size, and 12 ton clamping force. Good for prototypes or production. For more info visit us at www.mediummachinery.com

NISSEI 88-TON, MODEL FS80S12ANE, MACHINE #10, 5. 3 OZ (157 GRAMS), 1.57″ (40 MM) “C” SCREW, 1986, NPC-FFC1 CONTROLS, 14.76″ x 14.76″ (375 MM x 375 MM) TBS, 21.1″ x 21.1″ (535 MM x 535 MM) PLATENS, 20.1″ (685 MM) MAX DAYLIGHT WITHOUT SPACERS, 20 HP MOTOR, DIM: 15’7″L x 3’4″W x 6”H, WEIGHT: 7938 LBS.

Two Component Injection Molding Machine

Hybrid Injection Molding Machine

The mold is relatively small. It is only a 3 or 4 inch cube. Even a rough estimate will be fine. I’m looking for the time it takes the mold to open. And the time it would take to eject a simple part would be great too. I’m assuming it’s only a couple seconds but any help would be much appreciated. Thanks!
I don’t have the machine. This is for a school project.
I don’t have an injection molding machine. This is for a school project.

KHUON MAU

ARBURG 110-TON, MODEL 370C 1000-250, 6.1 OZ (173 GRAMS), MAN. 1/1992, ACTIONICA CONTROLS, 14.57″ x 14.57″ (370 MM x 370 MM) TBS, 29.53″ (750 MM) MAX. DAYLIGHT, 21.46″ x 21.46″ (545 MM x 545 MM) PLATENS, 20 HP MOTOR WIRED AT 480V, DIMS: 150″L x 42″W x 70″H, WEIGHT: 7937 LBS., CORE PULL, SPI ROBOT INTERFACE, 66363 OPERATING HOURS ON 11/04/2010, WEBSITE PHOTOGRAPHS www.acmeplasticfl.com MACHINE SPECIFICATIONS www.acmeplasticfl.com

A foreman for an injection-molding firm admits that on 39% of his shifts, he forgets to shut off the injection machine on his line. This causes the machine to overheat, increasing the probability that a defective molding will be produced during the early morning run from 5% to 15%. The plant manager randomly selects a molding from the early morning run and discovers it is defective. What is the probability that the foreman forgot to shut off the machine the previous night?

NEWBURY 75-TON, MACHINE #5, MODEL H4-75ARS, 1974, 4 OZ (113 GRAMS), RELAY CONTROLS, 12.25″ x 12.25″ (311 MM x 311 MM) TBS, 18″ x 18.25″ (457 MM x 464 MM) PLATENS, 20 HP MOTOR WIRED AT 230V, DIM: 127″L x 104″W x 72″H, WEIGHT: 8000 LBS., PHOTOGRAPHS MACHINE SPECIFICATIONS